Konica Minolta magicolor 2350 Reference Manual page 122

Installing the Crown Print Monitor+
The Crown Print Monitor+ is on the Software Utilities CD-ROM that comes
with your printer and is also available from our website
(printer.konicaminolta.net/support).
This chapter describes the steps for installing the Crown Print Monitor+ on
PCs using a Windows Operating System. Use this chapter if you need
detailed information about the installation procedures for the Crown Print
Monitor+, or if you've already completed the initial installation of the printer
software utilities and need only to install the Crown Print Monitor+. Additional
information is available in the Crown Print Monitor+ Administrator's Guide on
the Software Utilities CD-ROM.
2
Select the language, select OK, and then select Next from the Introduc-
tion dialog.
3
From the Main Menu dialog, select Install
Additional Software.
4
After reviewing the License Agreement,
select I Accept and then Next to continue.
118—Chapter 3.2
Installation Using the CD-ROM
1
Insert the Software Utilities CD-ROM into the
CD-ROM drive on your PC.
The Installer application automatically runs on most
PCs. If your PC configuration prevents the Installer
from auto-running, browse to the CD and
double-click on the setup.exe file in the root
directory to start the Installer application.
Installing the Crown Print
Monitor+