Konica Minolta magicolor 2350 Reference Manual page 261

Paper/Map
LOGICAL LOGICAL
TRAY 0 TRAY 1
PHYSICAL PHYSICAL
TRAY 1 TRAY 2
Quality Menu
TONER TONER
ACTION
*See 188 for a description of Duplex Density.
Quality/Toner
REPLACE
BLACK
*At this point, some older magicolor 2350 printers may also require you to select the toner car-
tridge size for cyan, yellow, and magenta cartridges. Although the black cartridge that comes with your
printer is standard capacity, replacement black cartridges come only in the high-capacity size, so you
don't need to select a black cartridge size during the installation process. If you accidentally select the
wrong cartridge size, use the Quality Menu/Toner/Change Size sequence in the configuration menu to
change the setting.
Click on shaded
Using the Printer Menu
MAP
tray 2 required
LOGICAL LOGICAL LOGICAL
TRAY 2 TRAY 3 TRAY 4
QUALITY MENU
AIDC *DUPLEX
DENSITY
duplex unit
required
QUALITY MENU
TONER
CHANGE SIZE
CYAN*
STANDARD HIGH CAPACITY
CYAN
menu items to view descriptions of equivalent PageScope Light controls.
LOGICAL LOGICAL
TRAY 5 TRAY 6
REGISTRATION TEST PAGE
PG 1
REPLACE ALL
YELLOW*
STANDARD HIGH CAPACITY
YELLOW
Chapter 5.3—257
LOGICAL LOGICAL LOGICAL
TRAY 7 TRAY 8 TRAY 9
TEST PAGE OPC
2 ACTION
MAGENTA*
STANDARD HIGH CAPACITY
MAGENTA