NPrinter Mode
1
Select the Set button.
2
Enter the required data
for NPrinter.
Print Server
Name
Printer
Number
3
Click Apply.
4
Turn the printer off and then on again.
Printer Interface Setup
KONICA MINOLTA
If the print server is associated to the NDS tree,
also enter the Preferred NDS Tree Name.
If the print server is associated to a file server, also
enter the Preferred NDS Server Name.
Allows you to check or change the printer number.
Make sure you use the same number here that you
set in NWAdmin.
Chapter 2.9—109