Konica Minolta magicolor 2350 Reference Manual page 92

Adding A Printer
CUPS provides two methods for adding printers: a command-line program
called lpadmin and a Web interface. The lpadmin command allows you to
perform most printer administration tasks from the command-line and is
located in /usr/sbin. The Web interface is located at: http://localhost:631/
admin and steps you through printer configuration.
Adding a Printer from the Command-Line
1
Copy the ppd file to /usr/share/cups/model.
2
Execute the command
/usr/sbin/lpadmin -p printername -E -v device -m file-
name.ppd
where printername is what you want to name the printer and device is the
printer's location (for example, parallel:/dev/lp0, or socket://11.22.33.44),
and filename.ppd is the name of the ppd file copied in step 1
3
To make this printer the default printer, type /usr/sbin/lpadmin -d printer
(where printer is the name of the printer from step 2).
Adding a Printer from the Web
To use the wizard from the local host you must first edit the cups.conf file.
1
vi the file /etc/cups/cups.conf and comment out the following lines in the
/admin section:
Order deny allow
Deny from all
Allow from 127.0.0.1
A # placed at the beginning of the line comments out the line.
2
Using your web browser, go to http://localhost:631/admin (where localhost
is the name of the computer with CUPS installed).
3
Enter root and root password in the dialog box.
4
Select add printer.
5
Follow the on-screen instructions and complete the setup.
88—Chapter 2.7 Installation Steps