Software, Drivers, And Ppds - Konica Minolta magicolor 2350 Reference Manual

Macintosh OS X—PPDs and Utilities Installation
OS X Step 1. Software Installation—Automatic
a The Software Utilities CD-ROM has an automatic installer program.
Simply insert the CD-ROM in your Macintosh's CD-ROM drive and
follow the on-screen instructions.
If this screen does not appear, double-click the KONICA MINOLTA
CD-ROM icon on your Macintosh desktop.
b Double-click the Install icon.
c Follow the instructions on the screen to install the magicolor 2350
PPD and utilities.
d After the PPD and utilities installation is complete, choose Quit.
OS X Alternate Step 1. Software Installation—Manual
Manual installation instructions are included in Chapter 2.6, "Installing Printer
Software, Drivers and PPDs for Macintosh."
OS X Step 2. Creating a Printer Queue
a Connect the printer to the Macintosh using USB or Ethernet connec-
tions.
For USB, plug one end of the USB cable into the Macintosh and the
other into the printer's USB port.
For Ethernet, you can connect in either of two ways:
Plug one end of a crossover Ethernet cable into the Macintosh and
the other into the printer's Ethernet port.
Use Ethernet patch cables and an Ethernet hub. Plug one end of
each patch cable into the hub, then plug the other end of one into
the Macintosh and the other end of the second into the printer's
Ethernet port.
b Locate and double-click the Print Center utility to open it.
c In the Printer List window, choose Add Printer.
d In the resulting window, select from USB, AppleTalk, or LPR to match
your printer connection.
USB—The magicolor 2350 appears in the window.
Introduction
The installer uses the path Hard Disk Name/Library/Printers/
PPDs/Contents/Resources/ for PPDs and the path Hard Disk
Name/Library/Fonts/ for fonts.
Chapter 1.2—15