Konica Minolta magicolor 2350 Reference Manual page 199

The following is
received by the printer
in succession:
Print job C is
received from
WS1.
Print job A is
received from
WS2.
Print job D is
received from
WS1.
This sequence causes
the following actions:
1
The printer acti-
vates the resident
PCL emulator after
print job C was
received. The PCL
emulator starts
from its default condition and processes the print job.
2
The next print job arriving (A) at the printer causes the resident PostScript
emulator to be activated and processes the print job.
3
Following, print job D from WS1 is received. The PCL emulator is acti-
vated and processes the print job.
Typefaces and Symbol Sets
What is a typeface?
A named design of a set of printed
characters, such as Times, that
has a specified obliqueness
(degree of slant) and stroke weight.
These are the supported typefaces and symbol sets.
Typefaces and Symbol Sets
Total Each Typeface and Symbol Set
144 PostScript Typefaces
What is a symbol set?
A named set of characters (such
as symbols) available within a
typeface. Multiple symbol sets
may be available within the
same typeface.
Chapter 5.2—195