Konica Minolta magicolor 2350 Reference Manual page 273

3
... via document defaults (Windows NT4) or
via printing preferences (Windows XP/2000)
Gives you access to the Paper, Page Layout, Image, Device
Options, and About tabs
Lets you assign the default printer settings for all print jobs
Retains your settings until changed again via properties
How To:
1 From the Windows Start menu choose Settings.
2 Choose Printers.
3 Select your printer.
4 From the File menu, choose Default Document Proper-
ties (Windows NT4) or choose Printing Preferences (Win-
dows XP/2000).
5 Make your selections, and then select OK to save your
changes.
6 Close the Printers window.
You should configure your printer driver settings via the printer device
properties and document defaults properties for your typical print jobs
and use your application's printer setup method for print jobs that
require special, less frequently needed printer settings.
Because Windows NT remembers the configuration changes you
make to the driver, reinstalling the driver does not restore the factory
default configuration.
Printer Device Properties in Windows XP/2000/NT4
The configuration items of KONICA MINOLTA PostScript drivers are arranged
on tabs in combination with the branches and tabs that are provided by the
Windows operating system. Each tab or branch represents a functional part
of a print job. See your operating system documentation and the printer
driver's online help for complete information.
The following are tabs that appear when the printer device properties has
been chosen. The tabs and a summary of the options found on each are as
follows:
General (Windows XP, Windows 2000, and Windows NT4)—Allows you
to name the printer, specify a location, specify a driver to be used, install a
new or updated printer driver, use a separator page between documents,
Accessing Windows XP/2000/
NT4 Printer Driver Configuration
Chapter 5.3—269