For More Information - Konica Minolta magicolor 2350 Reference Manual

For More Information

See "Printer-based Accounting" on page 274 for details about the Accounting
records that are saved in the Accounting file on your printer's hard disk.
Job Retention Options
Job Retention options are supported only in Windows applications,
and only on printers with an installed hard disk.
The Job Retention Options dialog in the KONICA MINOLTA PostScript printer
driver, contains controls for configuring print jobs that are held in your
printer's hard disk for later printing. These options allow you to configure print
jobs using the proofing, storage, and security features of your printer.
Proof-then-Print
This option prints one copy of a
multi-copy print job, and holds the
remaining copies in the printer's hard
disk. After proofing the printed copy,
you can elect to print the remaining
copies or delete the print job from the
printer's control panel.
The number of print jobs that
the printer can retain is
dependent on job size and
disk space.
After printing all copies, the job is
deleted from the printer's hard disk.
PJL Example:
<ESC>%-12345X@PJL
@PJL SET HOLD = PROOF
@PJL SET JOBNAME = "ProofThenPrint"
@PJL ENTER LANGUAGE = POSTSCRIPT
198—Chapter 5.2
When would I use
Proof-then-Print?
Whenever you want to review a
single copy of a print job before
allowing the additional copies to
print. This gives you a chance to
proof the printed pages before
spending the printer's time and
consumables to print additional
copies.
After reviewing the first copy, if you
determine that changes are
needed, you can cancel the print
job and save the cost and time of
printing the remaining copies.
Job Retention Options