Konica Minolta magicolor 2350 Reference Manual page 129

If an invalid or previously used IP address (host name or dot notation
identifier) is given, the following message displays:
If you receive this message, you must do one of the following:
a Select No and type another valid IP address (this is what we
recommend).
b Select Yes and add this address in the Network Host Name file on
your computer before you send any print jobs to the port. If a print job
is sent to the port before the address is entered in the Network Host
Name file, the job does not print.
c Select Cancel to abort adding the port and to exit from the Add Port
dialog box.
11
Configure the Timers and Port Setting using the instructions in "Configure
the Port" on page 125.
12
Choose OK.
The Configure Crown Port dialog box disappears.
13
Choose OK.
The Properties dialog box displays again and the port name appears in
the Print to the Following Port drop-down list box on the Details tab.
Configure the Port
1
Configure the
Timers.
Adding a Crown Port
Chapter 3.2—125