Parameter
Reset button
Save Custom button
Restore Custom button Changes all parameter settings to the Custom
Restore Factory button Changes all parameter settings to the Factory
Disk Operations
The Configuration/Disk Operations
window provides the following
parameters for configuration of
printer's with an installed hard disk:
Parameter
None
Format Flash
Menu
Select
Format Disk
Menu
Select
Menu
Select
* Click on
Configuration Page
Description
If you made changes to any of the parameter
settings but don't wish to apply the changes,
selecting this button restores the last submitted
parameter settings.
Saves the Current values of the parameters as the
Custom settings. Using the Restore Custom but-
ton, you can change the parameter settings back
to the Custom settings after changes are made.
values.
values.
Description
No disk operation is performed.
(Default=Selected)
Clears the Flash memory of the printer.
(Default=Not selected)
Formats the printer's internal hard disk, erasing all
data previously stored on the disk.
(Default=Not selected)
to view this parameter in the printer's control panel menu.
231