Konica Minolta magicolor 2350 Reference Manual page 221

Parameter
Page Orientation
Menu
Select
Page Recovery
Menu
Select
Collate
Menu
Select
Default Input Tray
Menu
Select
Menu
Select
* Click on
Configuration Page
Description
Identifies the page orientation that the printer
should use. Choices are
Portrait (Default) —Vertical orientation (longest side of
Landscape — Horizontal orientation (longest side of
When this feature is enabled (ON), following the
clearing of a media jam the printer reprints any
pages that did not progress to the output bin when
the media jam occurred. Choices are
OFF
ON (Default)
When this parameter is enabled for a multi-copy
print job, all pages of the first copy are printed
followed by all pages of the next. When Collate is
disabled for a multi-copy print job, all copies of the
first page are printed followed by all copies of the
next page. Choices are
YES (Default)
NO
Identifies the media tray that the printer uses as
the media source if no tray is specified by the print
job. Choices are
TRAY1 (Default)
TRAY2
to view this parameter in the printer's control panel menu.
media vertical)
media horizontal)
A hard disk must be installed to use the
Collate feature.
The optional Tray 2 must be installed to use
this setting.
217