Konica Minolta magicolor 2350 Reference Manual page 223

Parameter
Custom Paper Size
Width
Menu
Select
Custom Paper Size
Height
Menu
Select
Submit button
Reset button
Save Custom button
Restore Custom button Changes all settings to the Custom values.
Restore Factory button Changes all settings to the Factory values.
Menu
Select
* Click on
Configuration Page
Description
Sets the width measurement for custom paper
sizes. Choices are
3.6–8.5" (92.0 –216.0 mm) (Default=8.27" [110 V]
Sets the height measurement for custom paper
sizes. Choices are
8.3–14.0" (210.0–356.0 mm) (Default=8.27" [110 V]
Saves and applies any changes made.
If you made changes to any of the parameter
settings but don't wish to apply the changes,
selecting this button restores the last submitted
parameter settings.
Saves the Current values of the parameters as
the Custom settings. Using the Restore Custom
button, you can change the parameter settings
back to the Custom settings after changes are
made.
to view this parameter in the printer's control panel menu.
or 210 mm [220- V])
Custom media must be loaded in tray 1.
See "Media Specifications" in the
magicolor 2350 User's Guide for a list of
supported media types and sizes.
or 210 mm [220 V])
Custom media must be loaded in tray 1.
See "Media Specifications" in the
magicolor 2350 User's Guide for a list of
supported media types and sizes.
219