Konica Minolta magicolor 2350 Reference Manual page 248

Ethernet/TCP/IP
The Interfaces/Ethernet/TCP/IP window provides the following parameters
for configuration:
Parameter
Enable TCP/IP
IP Address
Menu
Select
Subnet Mask
Menu
Select
Default Router
Menu
Select
Enable DHCP/BOOTP Selecting this check box enables DHCP/BOOTP.
Menu
Select
Enable PING/ARP
Enable AUTO IP
Enable FTP
Enable Port 9100
Submit Button
Menu
Select
* Click on
244
(shown above)
Description
Enables the settings for TCP/IP.
(Default=Checked)
Contains the IP address.
(Default=192.168.1.2)
Contains the subnet mask address.
(Default=000.000.000.000)
Contains the default router IP address.
(Default=192.168.1.2)
(Default=Checked)
Selecting this check box enables PING/ARP.
(Default=Checked)
Selecting this check box enables automatic IP
detection.
(Default=Not checked)
Selecting this check box enables FTP.
(Default=Checked)
Selecting this check box enables Port 9100.
(Default=Checked)
Submits the selections made in this window.
to view this parameter in the printer's control panel menu.
Interfaces Page