Ethernet Interface - Konica Minolta magicolor 2350 Reference Manual

Ethernet Interface

The standard Ethernet interface is an RJ45 type of connector, capable of
transmission speeds from 10 Mbit/s up to 100 Mbit/s.
The above illustration shows the receptacle of the Ethernet interface
on the interface panel of the printer.
Making the TCP/IP Connection
1
Set the Internet address.
This setting must contain a unique IP address. Printers are shipped with a
preset IP address. In most cases you may want to modify this address, so
it doesn't conflict with any other IP address present in your network or in
networks attached.
Your network system administrator should assign the IP address.
You need the printer's IP address when setting up the port on your
workstation.
8—Chapter 1.1
1 8
Pin Description
1 Transmit Data(+)
2 Transmit Data (-)
3 Receive Data (+)
4 Reserved
5 Reserved
6 Receive Data (-)
7 Reserved
8 Reserved
Network Connections