Konica Minolta magicolor 2350 Reference Manual page 230

Parameter
PS Wait Timeout
Menu
Select
PS Error Page
Menu
Select
PS Protocol
Parallel
Menu
Select
PS Protocol
USB
Menu
Select
PS Protocol
Ethernet
Menu
Select
Submit button
Reset button
Save Custom button
Menu
Select
* Click on
226
Description
The PostScript Wait timeout is the maximum num-
ber of seconds the PostScript emulation waits for
incoming data from a particular print job. Choices
are
0–999 (seconds) (Default=15)
Choices are
ON (Default)
OFF
Sets the binary communications protocol (BCP).
Choices are
NORMAL
QUOTED BINARY (Default)
Sets the binary communications protocol (BCP).
Choices are
NORMAL
QUOTED BINARY (Default)
Sets the binary communications protocol (BCP).
Choices are
NORMAL
BINARY (Default)
QUOTED BINARY
Saves and applies any changes made to
parameter settings.
If you made changes to any of the parameter
settings but don't wish to apply the changes,
selecting this button restores the last submitted
parameter settings.
Saves the Current values of the parameters as the
Custom settings. Using the Restore Custom but-
ton, you can change the parameter settings back
to the Custom settings after changes are made.
to view this parameter in the printer's control panel menu.
Configuration Page