Dismounting The Engine - 990 Super Duke - KTM 2003 950 Adventure Repair Manual

1
3 4

Dismounting the engine - 990 Super Duke

NOTE: the procedure for dismounting the engine is the same as the
procedure used for the 950 Adventure; the only deviations are in the
preparatory work:
– Remove the spoiler and tank side covers.
– Disconnect the fuel hose connection (see Chapter 8), remove the
– Dismounting the throttle body: remove both side covers on the air
2
1
– Pull the throttle body up, disconnect the wiring harness, remove
– Unscrew the ball joints from the shift rod and the foot brake lever,
– Press down on the back of the assembly sand to jack up the
front tank screw, pull off the vent line and fold up the tank.
filter box, loosen the clamps
the fuel line .
2
both throttle cables and lift out the throttle body.
remove both footrest screws on the left and right, screw the
assembly stand 625.29.055.000 in the lower screw holes
and tighten.
motorcycle.
on the throttle body and dismount
1
3-12
and
3 4