NetComm NP2500 Specifications

24x10/100Mbps + 2 Gigabit Ports with Auto negotiation fast ethernet RJ45 ports with 24 port PoE function
Compliant with 802.3af specification
Supports PoE power up to 15.4W for PoE ports
Supports PoE power maximum up to 170watts for all PoE ports (port 1 - 24)
Supports PoE Powered Device (PD) classification identity
Supports manual setting for PoE port power limitation
Each port supports auto MDI/MDIX, so there is no need to use cross-over cables or an up-link port
Full/half duplex transfer mode for each port
Wire speed reception and transmission
Store-and-forward switching scheme capability to support rate adaptation and ensure data integrity
NP2500 Power over Ethernet Switch
The NetComm NP2500 has been designed specifically for
the SME and Branch Office markets. Offering 24 ports the
NP2500 provides PoE and switching functionality, scalability
and flexibility to the modern small to medium enterprise.
With 24 PoE ports delivering 802.3af standard based
PoE on both 10/100Mbps and 10/100/1000Mbps ports it
offers cost-effective implementation of devices requiring
LAN based power.
NP2500 Power over Ethernet Switch
24x10/100Mbps + 2 Gigabit Port Ethernet Web-Smart Switch

Power over Ethernet

Power-over-Ethernet (PoE) or "Active Ethernet" lets you run
a single CAT5 Ethernet cable to carry both power and data
to devices on the LAN. This eliminates the need to run
separate 240 Volt power to devices on a wired LAN.
It also allows greater flexibility in locating APs and network
devices and significantly decreases installation costs.
With Power over Ethernet, you can power network devices
up to 328 feet (100 meters) away, using standard CAT5
Ethernet cable.
(port 1-24)