WaterLogic WL100 Operating, Installation And Service Manual page 61

Small Amount of Water Periodically Dispenses from Faucet Automatically
Possible Reason
Cold or Hot Water solenoid
valve malfunction
Obstruction in solenoid
housing is preventing proper
sealing of component.
Dispense Buttons Stick
Possible Reason
Dirt or Foreign material is
filling the gap around the
push‐buttons.
WL100 Operating, Installation, and Service Manual Page 61 Revision: 5‐20‐2016
Inspect valve components for proper function. Replace as
necessary.
Pre‐determine whether water being dispensed is hot / cold.
Isolate the water supply; push the DISPENSE button to
release the line pressure, and remove the coil affixed to the
solenoid stem.
Remove the stem from the solenoid housing and allow water
from the tank to flush out the contaminant(s).
Inspect the push buttons and clean surrounding area.
Inspect faucet assembly inside the unit and clean as
necessary.
Solution
Solution