Table of Contents
Advertisement
5-18
Installing Maintenance Utilities
Various maintenance utilities are contained in your EXPRESSBUILDER CD-ROM. See Chapter 6 for installing the
utilities to your server or management workstations.
Updating the System
Update the system in the situation below:
Processor is expanded (expanded from single processor to multi-processor).
Modified system configuration.
Recovered the system using recovery process.
Log on to the system with an account that has administrative authority (e.g. Administrator) and insert the
EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.
[Setup Software] in [Master Control Menu] screen appears, so left-click the item. Click [Update Express5800 System]
from the menu and the setup will start. After that, follow the message to continue the setup process.
Making Backup Copies of System Information
The system information includes the current BIOS settings and any specific information for the server.
Save the information after completing the system setup.
Without the backup data, you will not be able to recover the information.
You can save the information by the following process.
1.
Insert the EXPRESSBUILDER CD-ROM in the CD-ROM drive and reboot the system.
2.
Select [Tools].
3.
Select [Off-line Maintenance Utility].
4.
Select [System Information Management].
5.
Set a floppy disk in the floppy disk drive.
6.
Select [Save].
Advertisement
Table of Contents
