NEC 140He User Manual page 98

4-26
Boot
Positioning the cursor on "Boot" shows the Boot menu which is used to set the boot priority.
The server searches for devices in the order set in this menu on booting. Finding the boot software, the server starts the
software.
The priority of the boot devices can be changed by using the ↑, ↓, +, and - keys. Move the cursor to the desired device
with the ↑ or ↓ key and change the priority with the + or - key.
IMPORTANT:
the figure above.
To boot EXPRESSBUILDER, set the priority of the devices as shown in