Table of Contents
Advertisement
11.
Repeat steps 4 to 9.
The recovery procedure will be started.
During the recovery, the missing files and the damaged files are replaced either to the files in C:\ I386 folder
of hard disk or the files in systemroot\ Repair of the system partition. These replaced files do not reflect the
changes of the configuration after the setup at all.
12.
Follow the instruction displayed on the screen.
If you take a note of any file name in which trouble is detected during the procedure, it is useful to diagnose
how the system has been damaged.
13.
Terminates the procedure if the recovery is successful.
You can verify that the replaced files are correctly copied to the hard disk if the computer is restarted
normally.
8-51
Advertisement
Table of Contents
