NEC 140He User Manual page 96

4-24
Console Redirection
Selecting "Console Redirection" on the Server menu shows the following screen.
See the table below for the items.
Option Parameter
BIOS Redirection [Disabled]
Port
Serial Port A
Serial Port B
ACPI Redirection [Disabled]
Port
Serial Port A
Serial Port B
Baud Rate 9600
[19.2K]
38.4K
57.6K
115.2K
Flow Control None
XON/XOFF
[CTS/RTS]
CTS/RTS+CD
Console Type PC ANSI
[VT100+]
VT-UTF8
Remote Console
[Disabled]
Reset
Enabled
Description
Selects the port to be used as the redirection port. The
parameters specified in Peripheral Configuration
submenu is used as address and interrupt.
Specify the I/O port address or interrupt level used in
ACPI headless console redirection.
If [Disabled] is selected, console redirection feature is
disabled.
Specify the baud rate used for the interface with
successive hardware consoles.
Specify the flow control method.
Specify the console type.
Specify whether the reset from remote console is
enabled or disabled.
Your Setting
[ ]: Factory-set