Standard Features - NEC 140He User Manual

140he
Table of Contents

Advertisement

2-12

STANDARD FEATURES

High performance
64-bit Intel® Xeon™ Processor MP
3.16GHz/1MB
3.66GHz/1MB
3.33GHz/8MB (on specific configurations
only)
High-speed memory access
(Supports DDRII 400-compliant
interleaved memory)
High-speed 1000BASE-T/
100BASE-TX/10BASE-T interface
(1000Mbps/100Mbps/10Mbps
supported)
High-speed disk access
(Ultra320 SCSI x 2)
High-reliability
Memory mirroring feature
Online sparing memory feature
Memory hot-swap feature
MemoryRAID feature
Memory monitoring feature (single-bit error
correction/ double-bit error detection)
Memory/processor degradation feature
(logical isolation of a failed device)
Bus parity error detection
Thermal sensor
Error notification
Internal cooling fan monitoring feature
Internal voltage monitoring feature
BIOS password feature
Security feature (security lock)
Redundant power supply
Disk array (onboard)
Recovering BIOS Data
Management Utilities
ESMPRO
DianaScope
Advanced Remote Management
Expandability
Wide variety of optional I/O slots
Two 32-bit/33 MHz PCI slots
Four 64-bit/100 MHz PCI-X sots (support hot-plug)
Two PCI EXPRESS(x8) slots (support hot-plug),
One PCI EXPRESS(x4) slot.
Large memory of up to 32 GB
3.5-inch hard disk drive bay holds five hot-swap SCSI hard
disk drives. If additional hard disk drive cage is installed,
system can support up to 13 hot-swap SCSI hard disk drives.
Remote power-on feature
Up to four multi-processors are available for upgrade.
USB interface
Many Available Features
Graphic accelerator "Radeon7000M" support
El Torito Bootable CD-ROM (no emulation mode) format support
POWER switch mask
Software power-off
Remote power-on feature
AC-LINK feature
Intelligent Platform Management Interface (IPMI) feature
Baseboard Management Controller (BMC)
Remote console feature
Self-diagnosis
Maintenance Features
Power Saving Feature
Easy and Fine Setup
Power On Self-Test (POST)
Test and Diagnosis (T&D)
Off-line Maintenance Utility
Memory dump feature using the DUMP switch
Sleep feature (available for Windows Server
2003/Windows 2000)
EXPRESSBUILDER (system setup utility)
Express Setup
Configuration Diskette Creator
SETUP (BIOS setup utility)
SCSI Configuration Utility (SCSI device utility)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/140heNec express5800 series

Table of Contents