NEC 140He User Manual page 137

IMPORTANT:
system, a BMC host name and a domain name cannot be exactly the same as those on the
server operating system. If BMC belongs to a different network domain, you can have the
same host name.
When you click [OK], all the information in the Network Configuration window with three tabs will be written into
BMC.
When you click [Cancel], the Network Configuration window closes discarding what you have configured.
HTTP Configuration
By clicking [HTTP Configuration] in the left pane of the BMC Configuration window, you will see a window as shown
below and you can make web server-related settings for BMC such as HTTP port.
IMPORTANT:
Number, the current connection will be disconnected.
Close the window once, and then enter the port number that has been newly configured in
the browser to log in.
Because the login page that remains to be displayed in the browser has been accessed by
the old address, you cannot use it to log in.
Because BMC uses a LAN controller independent of the server operating
If you change the settings of HTTP port number, Enable SSL, or SSL Port
4-65