Table of Contents
Advertisement
3.
Select ID-3/4/5 hard disks
Same as for Channel for ID-0/1/2, press Space in the status described in 3 to select Channel for ID-3/4/5 and
then press Enter to determine the selection. ("ONLIN A02-01/02/03" is then displayed.)
4.
Set logical drive
Pressing F10 in the status described in 3 displays a screen shown below. Set each item. Then select "Advance
Menu" to display the "Advanced" sub menu screen.
The setting contents are shown below:
Setting item
RAID
Size
Advanced
Stripe Size
Write Policy
Read Policy
Cache Policy
Span
Default (initial value)
5
Full capacity (logical drive)
64 KB
WRBACK
NORMAL
DirectIO
YES
Setting range
0, 5
Full capacity
2/4/8/16/32/64/128
WRTHRU
WRBACK
NORMAL
READAHEAD
ADAPTIVE
DirectIO
CacheIO
CANSPAN (YES)
NOSPAN (NO)
4-45
Advertisement
Table of Contents
