NEC 140He User Manual page 83

Memory Configuration
Selecting "Memory Configuration" on the Advanced menu shows the following screen.
See the table below for the items.
Option Parameter
DIMM Group Normal
#1 - #8 Not installed
Status Disabled
Memory [No]
Retest Yes
Extended 1MB
RAM Step 1KB
Every Location
[Disabled]
Online Spare [Disabled]
Memory Enabled
Memory RAS [Normal]
Feature Mirror
RAID
Hot-Add [Disabled]
Memory Enabled
Support
Description
Indicates the current memory status.
"Normal" indicates that the memory devices operate normally.
"Disabled" indicates that one or more memory devices are
defected.
"Not Installed" indicates that no memory devices are installed.
(Display only)
Clears the DIMM group error status information. Run this menu
when the failed DIMM(s) are replaced.
"1MB" indicates that the memory test is done in the unit of 1MB.
"1KB" indicates that the memory test is done in the unit of 1KB.
"Every-Location" indicates that every memory device is tested.
"Disabled" indicates that only memory initialization is done.
Select "Enabled" to enable the Online Spare Memory feature.
Set the memory configuration. Select "Mirror" to enable the
memory mirroring function. Select "RAID" to enable the memory
RAID function.
Specify whether to use the Hot-Add Memory feature on
Windows Server™ 2003 Enterprise Edition or Datacenter
Edition. Select "Enabled" to use the Hot-Add Memory feature.
4-11
Your Setting
[ ]: Factory-set