NEC 140He User Manual page 92

4-20
Option Parameter
10 minutes
20 minutes
60 minutes
120 minutes
Hot Key [L]
(CTRL+ALT+) Z
Secure Mode Boot [Disabled]
Enabled
Video Blanking [Disabled]
Enabled
Floppy Write [Disabled]
Protect Enabled
Power Switch [Disabled]
Inhibit Enabled
NOTE:
The Secure Mode is used to restrict access from unauthorized users. In the Secure
Mode, the POWER switch, SLEEP switch, RESET switch, keyboard and mouse are
disabled. The lamps on the keyboard flash in order from the ScrollLock lamp, the
CapsLock lamp, and the NumLock lamp. To resume server operation in the normal state
from the Secure Mode, enter the user password from the keyboard and press Enter key.
Description
Specify the key with which the secure mode is started. Press
the selected key with the Ctrl and Alt pressed to start the
secure mode.
Specify whether the server is operated in the secure mode at
the start of the server.
Specify whether the monitor is disconnected if the server is
entered into the secure mode.
Specify whether data write to the floppy disk inserted into the
floppy disk drive is enabled or disabled in the secure mode.
Specify whether the power switch is enabled or disabled. If this
item is set to "Enabled," the power cannot be turned off by
using the POWER switch (including the forced shutdown). The
system cannot also enter the power saving mode by pressing
the SLEEP switch.
Your Setting
[ ]: Factory-set