I/O Board - NEC 140He User Manual

I/O Board

1
2
1 Connectors for external devices
2 PCI slot error lamp (corresponds to PCI slots #1 to #9 from top)
3 PCI slot power lamp (upper) / PCI slot Fault lamp (lower)
(corresponds to PCI slots #4 to #9 from top)
4 PCI board slot (PCI slots #1 to #9 from top)
Slots 1, 2: Non-hot-plug PCI, 5V, 33MHz
Slot 3: Non-hot-plug PCI-Express (x4)
5 IPMB connector
6 BMC configuration jumper block
7 Jumper switch for CMOS/Password clear
8 Management LAN board connector
9 Fan connector
Number following the bold-faced number indicates port number.
10 SCSI connector
Ch-2, Ch-1, and HDD cage from left
11 Fan error lamp
Number following the bold-faced number indicates fan number.
12 Power BP connector
13 Lithium battery
14 DIMM connector for RAID
15 NiMH battery module for RAID
16 Battery module connector
17 LAN controller
17 16 15
3 4 5
6
Slots 4 and 5: (Hot-plug PCI-Express (x8)
Slots 6 to 9: Hot-plug PCI-X, 3.3V, 100MHz
9-6 9-3
14 13 12
7 8 9-1
10
9-4
2-9
11-6
11-3
11-2
9-2
9-5
11-5
11-4
11-1