Installing Windows Server™ 2003 X64 Editions; Creating "Windows Server 2003 X64 Edition Oem-Disk For Nec Expressbuilder - NEC 140He User Manual

140he
Table of Contents

Advertisement

INSTALLING Windows Server™ 2003 X64 EDITIONS
Preparations for Installation
NEC EXPRESSBUILDER CD-ROM
Microsoft® Windows Server™ 2003 Standard x64 Edition (CD-ROM)
User's Guide
Getting Started
Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER

Creating "Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER"

Before installing, create Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER.
NOTE:
If you have already "Windows Server 2003 x64 Edition OEM-DISK for NEC
EXPRESSBUILDER" for Express5800 Server which you are going to install Windows
Server 2003 x64 Edition, you do not need to create it again.
You can create Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER with the following two
procedures:
Create from the menu which appears when running Express5800 Server with NEC EXPRESSBUILDER.
If you have only Express5800 Server to create Windows Server 2003 x64 Edition OEM-DISK for NEC
EXPRESSBUILDER, use this procedure.
If Windows Server 2003 or Windows NT 4.0 can be operated on Express5800 Server, you can use the other
procedure described later.
Follow the steps below:
1.
Prepare one 3.5-inch floppy disk.
2.
Turn on your Express5800 Server.
3.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.
4.
Press the RESET switch or press Ctrl, Alt and Delete to reboot the server. (You may also turn off and then
on again to reboot the server.)
The system will boot from the CD-ROM and NEC EXPRESSBUILDER starts.
5.
Select [Create Support Disk] from [Tools].
6.
Select [Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER] from [Create Support
Disk] menu.
7.
Insert a floppy disk into the floppy disk drive according to the on-screen instruction.
Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER will be created.
Write-protect and attach a label, then keep it in a safe place.
Create from [Master Control Menu]
[Master Control Menu] runs on the following operating systems.
– Windows Server™ 2003 x64 Editions
– Windows Server™ 2003
– Windows® XP x64 Edition
– Windows® XP
D-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/140heNec express5800 series

Table of Contents