NEC 140He User Manual page 202

7-6
The following menu appears when starting the server using the EXPRESSBUILDER.
5.
Select [Tools].
6.
Select [System Diagnostics].
The System Diagnostics starts and completes in approximately three minutes.
When the diagnosis completes, the display changes as shown in the figure below.
Diagnosis tool title
Guide line
Diagnosis tool title: shows a name of this diagnosis and version information.
Test windows title:
Test Result:
Guide line:
Test window:
If an error is detected during the System Diagnostics, the test result shows "Abnormal End" in red colour.
Move the cursor and press Enter on the diagnosis where the error occurred. Take a note of the error message
showed, and contact your service representative.
Local console
TeDoLi(TEst & Diagnosis On Linux) Ver001.00(Build020901.1.1m)
Start10:06:58 End 10:09:58 Pass 000:03:00 TestTime 000:03:00
Test End : NormalEnd 03
<System>
MEM Memory
CACHE Cache
<SCSI>
HDD_02:000 DK32DJ-36W
[Enter] Detail Information [ESC] Return to Enduser Menu
shows the progress of diagnosis. When it completes, it shows "Test End"
shows the information including time of start, end and progress, and result of the
diagnosis.
shows a description of keys to navigate the window.
Move the cursor and press Enter to view the detail of the diagnosis.
Remote console
Test windows title
Test End
AbnormalEnd 00 ForceEnd 00
16 count NormalEnd
49 count NormalEnd
89 count NormalEnd
Test window
Test result