Table of Contents
Advertisement
CD-ROM in the CD-ROM drive.
2.
Press the Eject button on the front of the CD-ROM drive.
The tray comes out a little.
3.
Hold the tray lightly and pull it out toward you until the tray stops.
4.
Put the CD-ROM on the tray carefully and securely with the date recorded surface facing toward the tray.
5.
As shown in the figure below, hold the tray with a hand and press the CD-ROM with fingers of another hand
to make the hole of the CD-ROM fit to the rotor at the centre of the tray.
6.
Push the front of the tray lightly to retract it into the drive.
IMPORTANT: If a noisy sound in driving the CD-ROM drive occurs after setting a
CD-ROM, set it again correctly.
2-29
Rotor
Press this part of
CD-ROM.
Advertisement
Table of Contents
