Table of Contents
Advertisement
9-30
5.
Push the PCI board slowly and carefully into the slot.
6.
Push the PCI board until the connection part of the board is firmly connected into the slot.
IMPORTANT:
apply excess force to the PCI board when handling it. Applying excess force may cause
damage to the PCI board.
NOTES:
After installed a long board, secure it with the lock on the upper part of the guide rail.
Insulators are installed between the PCI board slots. They are for protecting the PCI
boards already installed. Take care not to remove or damage the insulator when
installing or removing the PCI board. If the insulator is taken off, reinstall the insulator
in place.
7.
Connect the cables to the PCI board while firmly holding the PCI board with your hand.
8.
Slowly close the tab to secure the PCI board.
9.
Press the PCI Hot Plug switch. The PCI Slot Power lamp flashes once and then, goes on.
NOTES:
If the server runs on Windows Server 2003 or Windows 2000, the operating system
automatically recognises the additionally installed PCI board and installs the driver.
If an error occurred in the installed board or slot, the PCI Slot Fault lamp goes on
(amber).
If failing to install the PCI board correctly, reinstall it. Be careful not to
Advertisement
Table of Contents
