NEC 140He User Manual page 159

maintenance partition), Express Setup will reserve the maximum area of the hard disk
to install Windows Server 2003.
You cannot go to the next screen if the specification is incorrect.
On specification, an error may occur in relationship with the specified contents of the
former screen and require to go back to modify the specification.
During the setup, the screen to specify the partition that Windows Server 2003 is to be
installed appears. The first 55 MB area displayed on the screen is a partition that is
used to store the configuration information or utilities unique of the server. We do not
recommend to delete this area, but if you do not want to reserve this 55 MB area,
perform the installation by manual setup. It is not possible to delete this area by
Express Setup.
NOTES:
If you click [Cancel] in [Basic Information] screen, the screen will go back to select
the operating system. [Cancel] exists only in [Basic Information] screen.
If you click [OK] in [Role of Computer] screen, the setup automatically selects default
value for the later specification to continue the installation.
13.
Copy the modules for the optional mass storage driver.
If you want to install the optional mass storage driver, insert the floppy disk attached to mass storage driver
into the floppy disk drive and follow the message to perform the installation.
NOTE: You can use this function only when the floppy disk drive is attached to the
system.
14.
Remove EXPRESSBUILDER CD-ROM from the CD-ROM drive according to the message.
If you proceed to the setup by using setup parameter file, remove the floppy disk from the floppy disk drive.
Insert Windows Server 2003 CD-ROM into the CD-ROM drive.
[Agree Software License Agreement] screen appears.
15.
Read the contents carefully and click [I agree.] or press F8 if you do agree. If you do not agree, click [I
disagree] or press F3.
IMPORTANT:
If you do not agree to this agreement, the setup terminates and Windows Server 2003
will not be installed.
If "NetWare Gateway (and Client) Service" is specified to install, the window to
specify the details of "NetWare Gateway (and Client) Service" pops up on the first
logon. Specify the appropriate value.
Now the Setup using Express Setup has completed.
5-9