Table of Contents
Advertisement
11.4.7 Compare instructions
SKE reg, #n4
Function: Skip if reg = n4 n4 = I
Skips the next instruction if the contents of register reg (X, A, H, L, D, E, B, or C) are equal to 4-bit immediate data
n4.
SKE @HL, #n4
Function: Skip if (HL) = n4 n4 = I
Skips the next instruction if the contents of the data memory addressed by register pair HL are equal to 4-bit
immediate data n4.
SKE A, @HL
Function: Skip if A = (HL)
Skips the next instruction if the contents of the A register are equal to the contents of the data memory addressed
by register pair HL.
SKE XA, @HL
Function: Skip if A = (HL) and X = (HL + 1)
Skips the next instruction if the contents of the A register are equal to the contents of the data memory addressed
by register pair HL and if the contents of the X register are equal to the contents of the next memory address.
However, if the contents of the L register are an odd number, an address whose least significant address is ignored
is specified.
SKE A, reg
Function: Skip if A = reg
Skips the next instruction if the contents of the A register are equal to register reg (X, A, H, L, D, E, B, or C).
SKE XA, rp'
Function: Skip if XA = rp'
Skips the next instruction if the contents of register pair XA are equal to the contents of register pair rp' (XA, HL,
DE, BC, XA', HL', DE', or BC').
274
CHAPTER 11 INSTRUCTION SET
: 0-FH
3-0
: 0-FH
3-0
User's Manual U10676EJ3V0UM
Advertisement
Table of Contents
