Key Repeat Rate; Clear Supply Usage History; Clear Custom Status; Usb Speed - Lexmark CS310 Service Manual

Key Repeat Rate

Note: This setting is available only on the MS610de model.
This setting indicates the number of presses per second for repeating keys. The range is 0.5–100, with increments of
0.5. The default setting is 15 presses per second.
To adjust this setting:
1
From the Configuration menu, navigate to Key Repeat Rate.
2
Touch the arrow keys to adjust the setting.
3
Touch to save the setting, or press X to return to the Configuration menu without saving any changes.

Clear Supply Usage History

This setting reverts the supply usage history (number of pages and days remaining) to the factory shipped level.
To clear the supply usage history:
1
From the Configuration menu, navigate to Clear Supply Usage History.
2
Depending on the printer model, press OK or touch Clear Supply Usage History to proceed.

Clear Custom Status

Executing this operation erases any strings that have been defined by the user for the default or alternate custom
messages.
To clear the custom status:
1
From the Configuration menu, navigate to Clear Custom Status.
2
Depending on the printer model, press OK or touch Clear Custom Status to proceed.

USB Speed

This setting is used to set the throughput of the USB port on the printer.
Available options:
•
Auto
• Full—Forces the USB port to run at full speed and also disables its high‑speed capabilities.
Service menus
191
5027