Repair Information; Removal Precautions; Data Security Notice - Lexmark CS310 Service Manual

Repair information

•
"Removal precautions" on page 197
• "Removal procedures" on page 219
•
"Left side removals" on page 219
•
"Right side removals" on page 232
• "Front removals" on page 252
•
"Bottom removals" on page 271
•
"Rear side removals" on page 290
• "Top side removals" on page 294
•
"Options removals" on page 300

Removal precautions

CAUTION—SHOCK HAZARD: For personal safety and to prevent damage to the printer, remove the power cord
from the electrical outlet before you connect or disconnect any cable, electronic board, or assembly. Disconnect
any connections between the printer and the PCs/peripherals.
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.

Data security notice

1
This printer contains various types of memory that are capable of storing device and network settings, information
from embedded solutions, and user data. The types of memory, along with the types of data stored by each, are
described below.
• Volatile memory—This device utilizes standard Random Access Memory (RAM) to temporarily buffer user data
during simple print and copy jobs.
•
Non-volatile memory—This device may utilize two forms of non-volatile memory: EEPROM and NAND (flash
memory). Both types are used to store the operating system, device settings, network information, scanner and
bookmark settings, and embedded solutions.
•
Hard disk memory—Some devices have a hard disk drive installed. The printer hard disk is designed for device-
specific functionality and cannot be used for long term storage for data that is not print-related. The hard disk
does not provide the capability for users to extract information, create folders, create disk or network file shares,
or transfer FTP information directly from a client device. The hard disk can retain buffered user data from
complex print jobs, as well as form data and font data.
To erase volatile memory, turn off the printer.
To erase non-volatile memory, see the menu item under
To erase the printer hard disk, see the menu item under
The following parts are capable of storing memory:
•
printer control panel
• UICC (User Interface Controller Card)
"Configuration menu" on page 184
"Configuration menu" on page 184
Repair information
197
5027
pertaining to this.
pertaining to this.