Ep Drive Assembly Removal - Lexmark CS310 Service Manual

EP drive assembly removal

1
Remove the left cover assembly. See
2
Remove the image transfer unit. See
3
Disconnect the three cables (A) from the LVPS.
4
Remove the two top screws (B) holding the top cover to the LVPS shield.
5
Remove the bin-full/narrow media sensor flag. See
"Left cover assembly removal" on page
"Image transfer unit (ITU) removal" on page
"Bin‑full/narrow media sensor flag removal" on page
Repair information
221
219.
243.
5027
231.