Tray X input sensor (S2) jam service check
The input (S2) sensor is part of the paper pick motor drive assembly FRU, and is not available otherwise.
Actions
Step 1
a
Clear paper path.
b
Fan the media.
c
Verify the proper tray settings for the media.
d
Check the condition of the pick tires.
e
Make sure the tray is fully inserted
Does the error clear?
Step 2
Remove tray 1.
Is the input S2 sensor flag (A) damaged?
Yes
Problem resolved.
Replace the paper pick
motor drive assembly.
See
drive assembly
standard tray
removal" on page
287.
Diagnostic information
65
No
Go to step 2.
Go to step 3.
"Paper pick motor
5027