Lexmark CS310 Service Manual page 75

Message
Maintenance kit nearly low [80.xy]
Maintenance kit very low [80.xy]
Memory full [38]
Network [x] software error [54]
Not enough free space in flash memory for
resources [52]
Action
For more information, contact customer support at
http://support.lexmark.com
If necessary, select Continue to clear the message and
continue printing. For non‑touch‑screen printer models, press
OK to confirm.
You may need to replace the maintenance kit very soon. For
more information, contact customer support at
http://support.lexmark.com
If necessary, select Continue to clear the message and
continue printing. For non‑touch‑screen printer models, press
OK to confirm.
Try one or more of the following:
•
From the printer control panel, select Cancel job to clear
the message. For non‑touch‑screen printer models, press
OK to confirm.
•
Turn off the printer, wait for about 10 seconds, and then
turn the printer back on.
•
Update the network firmware in the printer or print
server. For more information, contact customer support.
Try one or more of the following:
• From the printer control panel, select Continue to
continue printing. For non‑touch‑screen printer models,
press
• Turn off the printer, wait for about 10 seconds, and then
turn the printer back on.
• Update the network firmware in the printer or print
server. For more information, visit the Lexmark support
Web site at http://support.lexmark.com.
Try one or more of the following:
•
From the printer control panel, select Cancel job to clear
the message. For non‑touch‑screen printer models, press
OK to confirm.
•
Delete fonts, macros, and other data stored in the flash
memory.
•
Upgrade to a larger capacity flash memory card.
Note: Downloaded fonts and macros that are not
previously stored in the flash memory are deleted.
Diagnostic information
75
or your service representative.
or your service representative.
to confirm.
5027