Transportation And Storage; Cleaning And Care; Disposal Of The Device; Technical Data - Silvercrest SDS 3000 A1 Operating Instructions Manual

Telescopic camera tripod
Hide thumbs Also See for SDS 3000 A1:
Table of Contents


Available languages
  • EN

Available languages

  • ENGLISH, page 1
Should you wish to bring the tripod plate
vertical to the horizontal position, to take for example photos in portrait
format, then loosen the tripod head screw 9. Swivel the tripod plate 3 into
the required position and then retighten the tripod plate screw 9 fi rmly.

Transportation and storage

Transport the tripod by using the transport handle
when it is set up.
If you need to transport the tripod over long distances, then slide it together
and place it into the supplied transport bag.
Store the tripod at a clean and dry location. Preferably, in the supplied
transport bag.

Cleaning and Care

Do not use abrasive or aggressive cleaning materials. These could attack
the upper surfaces and irreparably damage the tripod.
Clean the tripod with a lightly moistened cloth.. For stubborn soiling use a
mild detergent on the cloth..

Disposal of the device

Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility. Observe the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.

Technical data

Max. loading
Height when compacted
Height when fully extended
Thread size
SDS 3000 A1
You can additionally stabilise the tripod by placing a weight (max. 2 kg)
on the accessory hook t.
3 through up to 90°, from the
z. This is also possible
approx. 3 kg
approx. 55. 5 cm
approx. 157 cm
6,35 mm / 1/4 inch


Table of Contents

Table of Contents