Table of Contents
Advertisement
Field
Delete
Selected
Show
Routes
Static Route
Table
Click Show Routes, the table as shown in the following figure appears. The table shows a
list of destination routes commonly accessed by your network.
Click RIP, the page as shown in the following figure appears. If the device is used as a
RIP-enabled router to communicate with other devices by using Routing Information
Protocol (RIP), you need to enable RIP. In this page, you can configure the parameters of
RIP, including the interface, received version, transmitted version.
temporarily.
Select a row in the Static Route Table and click it to delete the
row.
Click it, the IP Route Table appears. You can view a list of
destination routes commonly accessed by your network.
A list of the previously configured static IP routes.
4.6.2.2 RIP
www.encore-usa.com
Description
88
Advertisement
Table of Contents
