Table of Contents
Advertisement
After settings done, click Next. The page as shown in the following figure appears.
The procedure for configuring the ADSL settings of the router is as follows:
Step 1
Select the country where you are from the drop-down list.
Step 2
Select the corresponding ISP from the drop-down list.
After the selection, the protocol, connection type, VPI, VCI are displayed.
Step 3
Enter the correction information for dial-up.
There are six protocols available: PPPoE, PPPoA, 1483 MER: DHCP, 1483 MER: Static IP,
1483 Bridged, and 1483 Routed.
For example, please select Singapore and Infoserve Dial-up connection ADSL service from
the corresponding drop-down lists. The page as shown in the following figure appears.
41
www.encore-usa.com
Advertisement
Table of Contents
