Table of Contents
Advertisement
You are recommended to change the password after login for the first time. Enter the new
password twice and click Next. The page as shown in the following figure appears. In this
page, you can configure the system time and Network Time Protocol (NTP) server.
The following table describes the parameters in this page:
Field
Disable or enable NTP. You need to enable it if you want to configure the
State
parameters in this page.
Server IP
Enter the IP address of the specified time server manually.
Interval
Specify the interval that the router synchronizes the time with the server.
Time Zone
Select the time zone in which area you are from the drop-down list.
GMT time
It displays the Greenwich Mean Time (GMT).
Description
40
www.encore-usa.com
Advertisement
Table of Contents
