Table of Contents
Advertisement
Field
Set
VendorClass IP
Range
Click Show Client in the DHCP Mode page, the page as shown in the following figure appears.
In this page, you can view the IP addresses assigned to each DHCP clients.
The following table describes the parameters and buttons in this page:
Field
IP Address
MAC Address
Expired (s)
Refresh
Close
Click Set VendorClass IP Range in the DHCP Mode page, the page as shown in the following
figure appears. In this page, you can configure the IP address range based on the device type.
Click it, the Device IP Range Table page appears. You can
configure the IP address range based on the device type.
Description
It displays the IP address of the DHCP leased client.
It displays the MAC address of the DHCP client (for
example, computer).
Each Ethernet device has a unique MAC address. The MAC
address is assigned at the factory and it consists of six pairs
of hexadecimal character. For example, 00-14-78-0c-f2-ce.
It displays the lease time. The lease time determines the
period that the DHCP clients retain the assigned IP
addresses before the IP addresses change.
Click it to refresh this page.
Click it to close this page.
54
www.encore-usa.com
Description
Advertisement
Table of Contents
