Encore ENDSL-4R5G User Manual page 67

Field
Click Set WEP Key, and the page as shown in the following figure appears.
The following describes the parameters and buttons in this page:
Field
Key Length
Key Format
Default Tx Key
Encryption Key 1
to Key 4
 Select Enterprise (RADIUS), enter the port, IP
address, and password of the Radius server. You
need to enter the user name and password provided
by the Radius server when the wireless client
connects the router.
If the encryption is set to WEP, the router uses 802.1X
authentication, which is Radius authentication.
Select the WEP key length. You can select 64-bit or 128-bit.
 If the key length is set to 64-bit, you can select ASCII (5
characters) or Hex (10 characters).
 If the key length is set to 128-bit, you can select ASCII
(13 characters) or Hex (26 characters).
Select the index of WEP Key. You can select Key 1, Key 2,
Key 3, or Key 4.
The encryption keys are used to encrypt the data. Both the
router and wireless stations must use the same encryption
key for data transmission.
 If you select 64-bit and ASCII (5 characters), enter any
5 ASCII characters.
 If you select 64-bit and Hex (10 characters), enter any
10 hexadecimal characters.
 If you select 128-bit and ASCII (13 characters), enter
any 13 ASCII characters.
66
www.encore-usa.com
Description
Description