Table of Contents
Advertisement
DHCP Server
Click DHCP, the page as shown in the following figure appears.
The following table describes the parameters and buttons in this page:
Field
DHCP Mode
IP Pool Range
Show Client
Default
Gateway
Max Lease
Time
Domain Name
If set to DHCP Server, the router can assign information of IP
addresses, IP default gateway and DNS Servers to the hosts
that are in Windows95, Windows NT and other systems that
support the DHCP client.
It specifies the first and the last of continuous IP addresses of
the IP addresses pool.
Click it, the Active DHCP Client Table page appears. It shows
the assigned IP addresses of the clients.
Enter the IP default gateway of the IP addresses pool.
The lease time determines the period that the computers retain
the assigned IP addresses before the IP addresses change.
Enter the domain name if you know. If you leave this blank, the
domain name obtained by DHCP from the ISP is used. You
must enter host name (system name) on each individual
computer. The domain name can be assigned from the router
through the DHCP server.
53
www.encore-usa.com
Description
Advertisement
Table of Contents
