Table of Contents
Advertisement
(11)
What is the maximum number of local IP addresses supported by this Wireless
ADSL 2+ Modem Router?
Answer. The Wireless ADSL 2+ Modem Router can support up to 253 IP addresses in one
Class C IP domain.
(12)
What is ad-hoc mode?
Answer. When a wireless network is set to be ad-hoc mode, the wireless-equipped
computers are configured to communicate directly with each other, peer-to-peer, without the
use of an access point.
(13)
What is infrastructure mode?
Answer. When a wireless network is set to be infrastructure mode, the wireless network is
configured to communicate with a network through a wireless access point.
(14)
What is roaming?
Answer. Roaming is the ability of a portable computer user to communicate continuously
while moving freely throughout an area greater than that covered by a single access point.
Before using the roaming function, the computer must make sure that it is the same channel
number with the access point of dedicated coverage area.
(15)
What is ISM band?
Answer. The FCC and their counterparts outside of the U.S. have set aside bandwidth for
unlicensed use in the ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of
2.4 GHz, in particular, is being made available worldwide. This presents a truly revolutionary
opportunity to place convenient high-speed wireless capabilities in the hands of users around
the globe.
(16)
What is IEEE 802.11b standard?
Answer. IEEE 802.11b is an extension standard to 802.11 that applies to Wireless LAN and
provides maximum 11Mbps transmission speed in the 2.4 GHz band.
(17)
What is IEEE 802.11g standard?
Answer. IEEE 802.11g is an extension standard to 802.11 that applies to Wireless LAN and
provides maximum 54Mbps transmission speed in the 2.4 GHz band.
(18)
What is BSS ID?
Answer. A specific Ad-Hoc LAN is called a Basic Service Set (BSS). Computers in a BSS
must be configured with the same BSS ID.
107
www.encore-usa.com
Advertisement
Table of Contents
