Table of Contents
Advertisement
(4)
Failed to configure the Wireless ADSL 2+ Modem Router through web browser
(By a client PC in LAN)
Answer.
Check the following:
1.
Check the hardware connection of the Wireless ADSL 2+ Modem Router's
LAN port. The LED will light when a proper connection is made.
2.
Check your Windows TCP/IP setting. (Refer to Chapter 3 for setting details).
3.
Open the Windows System Command Prompt:
– For Windows 9x/ME: Manually enter "winipcfg", then press Enter.
– For Windows 2000/XP: Manually enter "ipconfig/all", then press Enter".
4.
You should have the following information listed on your Window System:
– IP Address: 192.168.1.x
– Subnet Mask: 255.255.255.0
– Default Gateway IP: 192.168.1.1
(5)
I forgot or lost my Administrator Password.
Answer.
Reset
the Wireless ADSL 2+ Modem Router to factory default by pressing the
"Reset" button for 5~10 seconds.
If you are still getting prompted for a password when saving settings:
1.
Access the Router's web interface by going to http://192.1681.1.
2.
Enter the default "username" and "password", and then clicks "Enter" to
login.
3.
Click on "Tools" and then click "User Management".
4.
Enter a new "Password" and new "Username" in the "Username" and
"Password" fields, and enter the same password in the second password
field to confirm the password.
5.
Click "Submit" after setup then click SAVE button to activate your setting.
110
www.encore-usa.com
Advertisement
Table of Contents
