Table of Contents
Advertisement
Field
Bridge
AC-Name
Service-Name
Apply Changes
Return
Undo
Click ATM Setting, the page as shown in the following figure appears. In this page, you can
configure the parameters of the ATM, including QoS, PCR, CDVT, SCR, and MBS.
The following table describes the parameters in this page:
Field
VPI
VCI
QoS
preset minutes, if the router does not detect the flow of
the
user
continuously,
disconnects the PPPoE and PPPoA connection.
You can select Bridged Ethernet, Bridged PPPoE, or
Disable Bridge.
Enter the accessed equipment type.
Enter the service name.
Click it to save the settings in this page temporarily.
Click it to return to the Channel Configuration page.
Click it to refresh this page without any settings
changed.
4.4.2.2 ATM Setting
The virtual path identifier of the ATM PVC.
The virtual channel identifier of the ATM PVC.
The QoS category of the PVC. You can select UBR,
CBR, rt-VBR, or nrt-VBR.
61
www.encore-usa.com
Description
the
router
Description
automatically
Advertisement
Table of Contents
