Table of Contents
Advertisement
Click Security, the page as shown in the following figure appears.
The following table describes the parameters and the buttons in this page:
Field
Encryption
Set WEP Key
WPA Authentication
Mode
4.4.3.2 Security
Select the wireless encryption mode. You can select
None, WEP, WPA (TKIP), WPA (AES), WPA2 (AES),
WPA2 (TKIP), or WPA2 Mixed.
Wired equivalent privacy (WEP) encrypts data frames
before transmitting over the wireless network.
Wi-Fi protected access (WPA) is a subset of the IEEE
802.11i security specification draft.
WPA2 Mixed is the collection of WPA and WPA2
encryption modes. The wireless client establishes the
connection between the router through WPA or
WPA2.
Key differences between WPA and WEP are user
authentication and improved data encryption.
It is available when you set the encryption mode to WEP.
Click it, the Wireless WEP Key Setup page appears.
Select Personal (Pre-Shared Key), enter the
pre-shared key in the Pre-Shared Key field.
65
www.encore-usa.com
Description
Advertisement
Table of Contents
